How to Fit a Silicone Controller Skin on Your Joy-Con

Quick answer

To fit a silicone controller skin on your Joy-Con, start by cleaning the controller, then align the skin carefully from the top edge, pressing outward to remove air bubbles as you go.

Step-by-step installation guide

1. Clean your Joy-Con thoroughly: Wipe down the controller with a microfiber cloth to remove dust, oil, and residue. Pay extra attention to the edges and around the buttons. Skipping this step can cause bubbles or the skin to lift over time.
2. Align the skin from the top edge: Hold the skin by its top edge and line it up with the top of the Joy-Con (near the L/R buttons). Gently press the center to tack it in place before moving downward. Starting from the middle of the controller often leads to misalignment at the corners.
3. Press outward to remove air bubbles: Using your thumb or a soft card, push from the center toward the edges in smooth strokes. Work slowly to force air out without stretching the silicone. If a bubble remains, lift the skin slightly and re-press; do not poke holes in the silicone.
4. Mold the skin around buttons and joysticks: Gently press the silicone into the contours around the D-pad, face buttons, and joystick base. Ensure the skin sits flat and doesn't interfere with movement. If the skin feels too tight near the joystick, it may not be fully seated—recheck alignment.
5. Let the skin settle for 30 minutes: After installation, leave the Joy-Con untouched for at least 30 minutes. This allows the silicone to conform fully to the controller shape. Using the controller immediately can cause the skin to shift before it bonds.

Product facts

• GeekShare Catroller Silicone Controller Skin: Catroller Design – Features a playful cat-inspired design with cute paw details and soft pastel tones for a fun gaming look. The soft pastel tones and paw details add personality to your Joy-Con without adding bulk, making it easy to grip during long sessions.