Cat JOJO Full Coverage Case Installation Guide

Quick Answer

Installing the GeekShare Cat JOJO Full Coverage Protective Case on your Nintendo Switch OLED takes about two minutes. Follow the steps below to get a secure fit without scratching your console.

Installation Steps

1. Prepare the Console: Turn off your Switch OLED and remove any existing case or screen protector. Wipe the console with a dry microfiber cloth to remove dust and fingerprints. Common mistake: Installing over a screen protector that is too thick can cause the case to lift at the edges.
2. Align the Case Bottom First: Hold the case with the cat paw design facing outward. Insert the bottom of the Switch OLED into the case first, making sure the charging port and speaker grilles line up with the cutouts. Checkpoint: The USB-C port cutout should be fully open — if it's blocked, the case is not seated correctly.
3. Press the Top Edges Into Place: Gently press the top corners of the console into the case. Work from the bottom up, pressing along the edges until you hear a soft click. The silicone should sit flush against the console. Common mistake: Pressing too hard on the screen area can crack a glass screen protector. Apply pressure only on the back and edges.
4. Attach the Thumb Grip Caps: Push each cat paw thumb grip cap onto the analog sticks until it sits flat. Rotate the cap slightly if it feels loose — this helps it grip the stick better. Checkpoint: If a cap spins freely, remove it and press it on again with even pressure. A loose cap can slip off during gameplay.
5. Test Fit and Function: Turn on your Switch OLED and check that all buttons, triggers, and the kickstand work without resistance. Slide the console into the dock to confirm the case does not block the dock opening. Common mistake: Some full coverage cases add thickness that prevents the console from fitting in the official dock. The Cat JOJO case is designed to be dock-friendly, but always test it.

Product Facts

• GeekShare Cat JOJO Full Coverage Protective Case: The Cat JOJO case is made from flexible silicone for a smooth touch and comfortable grip. The soft material makes installation easier because it can stretch slightly without tearing, but it also means the case may attract lint over time.